We have collected information about At Command Send Sms With Delivery Report for you. Follow the links to find out details on At Command Send Sms With Delivery Report.
https://stackoverflow.com/questions/40397182/at-commands-for-sms-delivery-report
I am working on project where i have to send SMS to presons. if the persons doesn't receives the SMS, I have to send him again. So, for i need successful SMS delivery report. how to get and read SMS delivery status or report.? i am using SIMCOM 800 device and …
https://www.smssolutions.net/tutorials/gsm/sendsmsat/
Sending the message To send the SMS message, type the following command: AT+CMGS="+31638740161" <ENTER> Replace the above phone …
https://support.industry.siemens.com/tf/WW/en/posts/how-to-get-delivery-report-using-at-command/95327?page=0
Jul 22, 2013 · The Command set posted by you already shows Delivery confirmation Msg received. This is how, I understand the Msg :-----AT+CSMP=49,167,0,0OK < Set Msg sending parameters> AT+CNMI=2,2,0,1,0 OK AT+CMGS="Mobile Number" > Message content (Ctrl+Z) < Send a Msg in Text Mode i.e. Send SMS > +CMGS: 72 OK < Successful Transmission>
https://support.nowsms.com/discus/messages/1/19273.html
Jan 23, 2007 · I did as you mentioned but delivery reports still don't work by sending sms thru http or smpp. We use gsm modem option globetrotter gt max. I'm able to send sms with delivery report thru mobility manager (default software for this modem) so I think that this modem supports delivery reports.
http://smsiseasy.com/technical-information/
It is to set the GSM / GPRS modem to operate in SMS text mode. ) 8. Type “AT+CMGW=”+651234567″ ” and press Enter (it’ll show “>”.”+65″ is country code, “1234567” is recipient’s number) 9. Start typing SMS. When finished, press Ctrl + Z (it’ll show “+CMGW:1”, it means the message is stored as index:1 in the message storage)
https://stackoverflow.com/questions/4526539/send-sms-with-delivery-report
1 Answer 1. you first read all messages from the SIM (since status report msg is sent as sms back to your SIM from the provider you use). Iterate through these msgs and filter out the status msgs. You must have saved the id of the sent sms from your mobile data.Status.ToString() :
https://bishwahang.blogspot.com/2013/05/getting-sms-deliver-notification-from.html
May 01, 2013 · After setting up the Notificaton setting, you can send the SMS using AT+CMGS="PhoneNumber" and wait for few seconds to get the delivery status report from the message center. A successful delivery report will have error code "0" at the end.
https://www.diafaan.com/sms-tutorials/gsm-modem-tutorial/at-cmgs-text-mode/
The AT+CMGS command sends an SMS message to a GSM phone. In text mode this command is less powerful than in PDU mode but it is certainly easier to use. Parameters. <CR> = ASCII character 13. <CTRL-Z> = ASCII character 26. <mr> = Message Reference. Example. Set the GSM modem to Text Mode SMS and send a message to GSM number +31628870634.
https://www.developershome.com/sms/cmgrCommand.asp
26.2.1. Syntax of the +CMGR AT Command in SMS Text Mode. The syntax of the +CMGR AT command in SMS text mode is: +CMGR=index. index is an integer specifying the location of the SMS message to be read from the message storage area. 26.2.2. Format of the Information Response of the +CMGR AT Command in SMS Text Mode
Searching for At Command Send Sms With Delivery Report?
You can just click the links above. The data is collected for you.
