We collected information about Logging Cross Country Hours for you. Follow the liks to find out everything about Logging Cross Country Hours.
https://www.boldmethod.com/learn-to-fly/regulations/logging-cross-country-flight-time/
Legal Interpretation. Any person who holds a pilot certificate (Anything from a …
https://www.aopa.org/training-and-safety/learn-to-fly/old-pages/logging-cross-country-time/logbooks-and-logging-time
AOPA recommends that you log all cross-country hours under the basic cross-country column and then add the distance and landing information under the notes or remarks column alongside. This will enable the pilot to correctly provide his or her cross-country hours depending on the question asked, the situation presented, or the certificate or rating sought.
https://www.pilotsofamerica.com/community/threads/logging-cross-country-time-for-50hr-cc-ifr-requirement.102515/
Tried searching the web for this and didn't find what Im looking for. Im totaling up my cross county hours and curious about the few cross country hours I took with my CFI as a student for my PPL. Since I was a student receiving dual instruction I assume my cross country time does not count towards my 50hrs of CC for the IFR.
https://www.askacfi.com/32446/logging-cross-country-time-for-atp.htm
Logging cross country time for ATP. Asked by: FlyingTip 8041 views Commercial Pilot. for the private pilot license, cross country time is counted as a landing at an airport 50 nautical miles or greater..... I've been told the requirements are different for the ATP 500 hours of cross country. Can someone shed some light on this?
https://aviation.stackexchange.com/questions/69766/how-to-log-pattern-work-time-during-x-country
I am working on my IFR part 61 and must have 50 hours of X-country as PIC. Lets say my instructor and I fly to an airport that is 55 miles from my take off airport - it takes us 0.8 hours from take off to land.. Then, on our way back, we do pattern work at another airport - 0.4 hours to fly and 0.7 hours for pattern work. Then, final leg of flying - 0.3 hours.
https://www.premierflightct.com/newsletters/TrainingArticles/SafetyPilotRules.html
Note that if the flight was a cross country (more than 50 NM) flight, the safety pilot cannot log any portion of the flight as cross country. For Private Pilots to log cross country time for the purpose of obtaining a higher certificate or rating there must at least one landing more that 50NM straight line distance from the starting point (FAR ...
https://www.boldmethod.com/learn-to-fly/regulations/your-guide-to-logging-sic-flight-time-in-single-pilot-airplanes/
Time you log can be used to fulfill the PIC requirements for an ATP Certificate, which includes the required 250 hours of PIC time (with …
Searching for Logging Cross Country Hours?
You can just click the links above. The info is collected for you.
