We have collected information about Linux Dvb Delivery System for you. Follow the links to find out details on Linux Dvb Delivery System.
https://www.kernel.org/doc/html/v4.10/media/uapi/dvb/frontend-property-terrestrial-systems.html
2.4.8.2. DVB-T2 delivery system¶ DVB-T2 support is currently in the early stages of development, so expect that this section maygrow and become more detailed with time. The following parameters are valid for DVB-T2: DTV_API_VERSION; DTV_DELIVERY_SYSTEM; DTV_TUNE; DTV_CLEAR; DTV_FREQUENCY; DTV_MODULATION; DTV_BANDWIDTH_HZ; DTV_INVERSION; …
https://kernel.readthedocs.io/en/latest/media/uapi/dvb/dvbproperty.html
DVB Frontend properties¶ Tuning into a Digital TV physical channel and starting decoding it requires changing a set of parameters, in order to control the tuner, the demodulator, the Linear Low-noise Amplifier (LNA) and to set the antenna subsystem via Satellite Equipment Control (SEC), on satellite systems.
https://www.kernel.org/doc/html/v4.9/media/uapi/dvb/frontend-property-terrestrial-systems.html
2.4.8.2. DVB-T2 delivery system¶ DVB-T2 support is currently in the early stages of development, so expect that this section maygrow and become more detailed with time. The following parameters are valid for DVB-T2: DTV_API_VERSION; DTV_DELIVERY_SYSTEM; DTV_TUNE; DTV_CLEAR; DTV_FREQUENCY; DTV_MODULATION; DTV_BANDWIDTH_HZ; DTV_INVERSION; …
https://www.kernel.org/doc/html/v4.12/media/uapi/dvb/dvbproperty.html
2.3. DVB Frontend properties¶. Tuning into a Digital TV physical channel and starting decoding it requires changing a set of parameters, in order to control the tuner, the demodulator, the Linear Low-noise Amplifier (LNA) and to set the antenna subsystem via Satellite Equipment Control (SEC), on satellite systems.
https://www.kernel.org/doc/html/v4.18/media/uapi/dvb/dvbproperty.html
Don’t use DVB API version 3 calls on hardware with supports newer standards. Such API provides no suport or a very limited support to new standards and/or new hardware. Nowadays, most frontends support multiple delivery systems. Only with DVB API version 5 calls it is possible to switch between the multiple delivery systems supported by a frontend.
https://www.linuxtv.org/wiki/index.php/Dvb-fe-tool
The dvb-fe-tool can also be used to monitor a DVB frontend statistics without touching on the device. The typical usage is to be able to read the statistics while some other DVB program or application is in use. Example, while dvbv5-zap is running, you could do: $ dvb-fe-tool --femon To enable the frontend monitoring mode.
https://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
The command line steps described are also indispensable for quick setup and no frills viewing with DVB hardware under Linux. Note: 1 In other words, this article assumes that you have already both: physically installed the device into, or attached it to, your system (refer to the manufacturer's instructions for such details) and
Searching for Linux Dvb Delivery System?
You can just click the links above. The data is collected for you.
